6.3. Inhibition input.
The selection of the Supervised Messages will be deleted if you run the utility "Factory Reset" on the Supervisor Menu only,
but will not be altered or disabled, if you run the same utility "Factory Reset" from the Service Menu.
To enable the "INHibition" function follows the next steps.
1.
Press "
" to select the Inhibition input selection box.
2.
Press
"OK"
to activate the edit mode.
3.
It will appear "[Disabled]" indicating you can change this option.
4.
Select "[Enabled]", using the " " o " " keys, and press
"OK"
to fix the new value.
NOTE:
The activation mode of the Inhibition input can be by open contact or by closed contact.
This selecton is common to the selected for the rest of the external inputs (IN1 to IN10).
For more details see paragraph
"6.4.4 Messages Setup".
6.2. Supervised Messages.
It is possible to select up to 2 messages to be constantly monitored to detect degradation and alert the security system by
activating the FAULT signal, opening the FAULT contact in the rear panel. The monitoring function works continuously in the
background after activation.
For activation select "Messages" and click
"OK"
in the Supervisor menu. Then the following screen message selection
appears. Follow the next steps to select some Supervisor message.
1.
Press "
" or "
" to select the desired supervised message, 1 or 2.
2.
Press
"OK"
to activate the audio filename selection list.
3.
Press " " or " " to select the audio message from the list.
4.
Press "OK" to fix the audio message.
5.
The system will take time to analyze the contents of the selected file and enable file
supervision, during which time the MESSAGE LED on the front panel keep blinking and
the keyboard is not operational. Please wait until the LED turns off and the system
resumes normal operation mode.
6.
Press
"BACK"
to come back to the Supervisor menu.
NOTES:
• The selection of monitored messages will be deleted if you run the utility "Factory Settings" Supervisor Menu only within, but not
be altered or disabled, if you run the same utility "Factory Settings" from the Service Menu.
6.4. System Adjustments.
To set some system parameters, select "Adjustments" option on the Service Menu and
press
"OK".
Then, the System Adjustments screen will appear.
GD-36
Messages
Supervised 1
1.[evacuation.wav]
Supervised 2
Disabled
Adjustments
Ethernet
>
Rec
>
Time and Date
>
Remote Events
>
Calendar Events
>
• To stop the playback of a supervised message must be press the "
STOP
" button on
the front panel and then enter the "
Supervisor Password
" (Password Level 2) using
the navigation keyboard (" " or " " to change value, " " or " “ to change the digit,
and "OK" to validate). Just in case the password was accepted the playback of the
supervised message will be canceled. In case the password was not accepted, type
the password again and repeat the process. If you don't know the right password, click
on "
BACK
" to abort the cancelation and return to the normal screen mode.
22:00:00
Enter Password
28
13
610.396A
rev.
1