6.4.3. Clock and Date Setup.
The clock/calendar must be adjusted on some occasions, eg, after changing the lithium battery that power it, or when during the
initial installation, and keeps on time when mains and secondary power supplies fail.
To adjust time/date, please follow the next steps.
1.
Press " " to select the Time option.
2.
Press "OK" to activate the Time edit mode.
3.
The "[2]3:10:00" appears indicating that the first digit of the hours can be set
using the " " or " " keys.
4.
To change to other digits, please use the " " o " " keys. To validate the Time
press "OK".
5.
Press " " to select the Date option.
6.
The "[0]8/03/12" appears indicating that the first digit of the day of month can be
selected using the "
" or "
" keys.
7.
To change to other digits, please use the " " o " " keys. To validate the Date
press "OK". After validate the date, automatically the weekday will be updated.
8.
Press " “ to go to the selection of the Daylight Saving mode (See section
5.2.1 for details).
9.
Press "OK" to activate edit mode Daylight Savings Time (Summertime).
10.
In the screen will appear "[2AM<->3AM]" indicating that you can change the
default option.
11.
Select the desired value using " " o " “ from the options below and click
"OK" to exit of the edit mode.
If you select "Others" and press "OK" will display more options in the menu to
specify the parameters "Start Date" and "Start Time", "End Date" and "End
Time" using the keys and the usual process.
OFF 2AM3AM 1AM2AM OTHERS
6.4.4. Messages Setup (remote input activation).
The messages setup has as options the next ones:
• Activation Mode.
It's selected how the external inputs will be attendant (IN1 to IN10
and INHibition), if by Open or Close contact.
• Priority Type.
It's selected how the system will manage the priorities between all
inputs, by geographical mode (IN1 > IN2 >…> IN10), or by numerical type (1 to 10,
where 1 is more prioritary than 2, 2 more than 3 and so on, and 0 is disabled).
For every remote in (IN1 a IN10) is possible to set some parameters as follows:
- Audio file name (.wav).
- Priority Level.
- Activation by EDGE (push-button) or by LEVEL (switch). In EDGE mode, the
message will be broadcasted only once, whereas in LEVEL mode, the message will
be repeated continuously as long as activated the associated remote input.
- Auxiliary Outputs that will be turn on meanwhile the audio file is played. Note that,
*
X
: Enabled Output.
*
0
: Disabled Output
GD-36
Messages
Activation Mode
Close Contact
Priority Type
Geographical
Remote In
>
28
17
610.396A
rev.
1