6.1. Supervisor Setup.
Within the "Service Menu" select "Supervisor" and enter the Access Code Level 2,
designed to enable advanced security features.
NOTA:
The default Supervisor Access is
"1111".
This password can be changed executing the
tool "New Password" on the Supervisor menu. Note that this password will be restored
to the default whenever you run the utility restore "Factory Reset" in the Supervisor
menu.
4. To change to other digits, please use the " " o " " keys. To validate the
password press "OK".
5. If the password is correct, then the "Service Menu" appears.
6. If the screen shows the "
Wrong password
", please enter the password again.
NOTES:
•
The default password is
"1234".
This password can be changed from the utility
"New password", following the same steps used with "ENTER PASSWORD".
• Note that this key will be restored to the default whenever you run the utility restore
"Factory defaults".
6. ADVANCED SETUP.
To access the advance settings you must enter a Level 1 access PASSWORD from the "MAIN MENU".
1. Press " " to select the input data line.
2. Press "OK" to activate the input password mode.
3. The "[0]***" will appear on the screen, indicating that the first digit can be selected
with the " " o " " keys.
GD-36
How restore the Factory Values (or default):
1.
Press " " to select the option line.
2.
Press "OK" to activate the input mode.
3.
The "[No]" will appear on the screen, indicating that this option can be changed.
4.
Select "[Yes]", using the " " o " " keys, and press "OK" to execute the
restoring to factory default.
5.
After pressing OK, the device reset itself automatically to get new data.
Service menu
Enter Password
****
Wrong password
Service menu
New password
Adjustments
>
Supervisor
>
Factory Reset
>
Menu de servicio
Nueva Clave
****
Factory Reset
All settings will
be lost.
Are you sure?
No
Supervisor
New Password
>
Messages
>
Inhibition input
Disabled
Factory Reset
>
28
12
610.396A
rev.
1