AeroCut XPro OPERATION MANUAL
51
16
Overload error 3
An overloading error occurred at the slitter.
Check the blinking slitter.
17
Final cutting measurement error
Correct the final cutting measurement to exceed
the value specified below.
19
Cut piece number error
Correct the number of cut pieces to be in the
value range below.
The maximum number of pieces is subject to
change depending on the operation.
21
Guillotine error
The cutter blade has moved and is staying at
lower position.
Move the cutter to top dead center.
22
Bottom margin error
Correct the bottom margin to fit in the value range
below.
23
Top margin error
Correct the top margin to fit in the value range
below.