AeroCut XPro OPERATION MANUAL
43
When the print is shrunk or stretched.
・
Input ratio into D if the printing is stretching to the feed direction.
・
Input ratio into E if the printing is stretching to the width direction.
・
Ensure that when these ratios are changed, all parameters such as card size and gutter
size will be changed as well.
・
Must be from 80% to 120%
EX:
If printing should be 4.000” width,
but actual printing is 4.080”,
input 102.0% into D.
When the lengths of the last 2 cards are different from others.
・
F Input a correction value to F to compensate the length of the second last card.
・
Input a correction value to G to compensate the length of the last card.
○
E
○
D
○
G
○
F
4.080”
4.000”
×
100 = 102%
