AeroCut XPro OPERATION MANUAL
25
③
The picture below is an example which will explain how to input values.
:
Cut
:
Crease
:
Perfo
④
Press the number to change the value.
⑤
When data input is completed, press NEXT to the next screen.
⑥
This screen allows you to input each pitch from No. 1 to No. 20.
・
The adjacent switches are used for selecting no operation, guillotine, creaser, or X-
perforator.
・
Every time the switch is pressed, the selected operation changes.
・
If the pitch of 0.0 is input, all the pitches after that one are corrected to 0.0 (no
operation).
・
Pressing SAME PITCH copies the No. 1 pitch and its relevant operation to No. 2 to
No. 20 pitches.