AeroCut XPro OPERATION MANUAL
45
②
In case the length of leading edge is wrong.
・
With cut mark
Input the difference between inputted value and actual
measurement into E.
EX:
In case input value is 0.400” and cut measurement is
0.450”, input -0.050 to E.
(
You can input
±
0.400” at the most
)
・
Without cut mark
Input the difference between inputted value and actual
measurement into F.
EX:
In case input value is 0.600” and cut measurement is
0.550”, input +0.050 to F.
(
You can input
±
0.400” at the most
)
③
In case X-perforation position in feeding direction is wrong.
・
In case the layout has X-Perforation only.
Input the difference between inputted value
and actual position of X-perforator into G.
EX:
In case input value is 7.750” and actual
perforation position is 7.790”, input
–
0.040 to
G.
(
You can input
±
0.400” at the most
)
・
In case the layout has X-perfo and other
processes such as cross cut at the same time.
Input the difference between inputted value
and actual position of X-perforator into H.
EX:
In case input value is 2.000” and actual
perforation position is 1.940”, input +0.060 to
H.
(
You can input
±
0.400” at the most
)
○
E
○
F
○
G
○
H