AeroCut XPro OPERATION MANUAL
34
4.5
How to adjust the depth of Y-perforation
①
Loosen knob A
②
Adjust height with knob B.
③
Tighten knob A to fix the position.
4.6
Barcode reader
・
With the barcode reader, the machine is capable to read barcodes (job number) printed
on papers, recall jobs and process papers automatically.
①
To activate the Barcode reader, press BARCODE button.
②
Press the BARCODE MODE button to switch barcode reading modes according to the
purpose.
CHANGE SHEET – Automatic job changeover
1.
The machine reads the barcode and compares to the selected job.
2.
If the job number read is different from the job selected, the machine
will recall the job number read, and change over the setting.
3.
After the job setting changeover, the machine will automatically
start processing.
CHANGE SET – Prevention of contamination
1.
The machine records the barcode on the first sheet of the new job.
2.
When the machine reads a barcode, which is different from the
recorded one during one set, it stops processing.
Unlock
Knob B
Knob A
