1
TABLE OF CONTENTS
Tool handling and use ...................................................................... 2-3
Limitations of use ............................................................................. 3-4
Maintenance ....................................................................................... 5
Operation ......................................................................................... 6-7
Assembly ............................................................................................ 7
How to change the piston and sleeve ................................................. 8
Cleaning and maintenance ................................................................. 9
Deluxe equipment ............................................................................. 10
Parts list and diagram .................................................................. 11-12
Headed fasteners ............................................................................. 13
Fastener penetration guide ............................................................... 13
Replacement parts and repair service .............................................. 13
Training course ............................................................................ 14-21
Warranty ........................................................................................... 22
INTRODUCTION
The LV 365 is designed for speed, convenience, economy and above all...
SAFETY. The LV 365 will give many years of service. To ensure consistent,
trouble-free operation of the LV 365 and to prevent injury, follow the
instructions in this manual for operating, cleaning, and maintaining the tool.
PRIOR TO THE USE OF THIS TOOL, THE OPERATOR SHOULD BE
PROPERLY TRAINED BY A QUALIFIED INSTRUCTOR
In this instruction manual you will also find illustrations of the LV 365 as well
as information about cartridges, pistons, and spare parts. If you have
questions which are not addressed in this manual, or if you have special
fastening applications, please contact your nearest UCAN Fastening
Products' Distributor.
TOOL FEATURES
Tool length:
13-5/8"
Fastener range up to: 2-1/2 inches
Tool weight:
5.1 lbs.
10 cartridge magazine with
semi-automatic cartridge advance.
2
TOOL HANDLING & USE
1.
Operate tool with powder loads and fasteners specified by the
tool manufacturer.
2.
Only trained operators may use powder actuated tools.
3.
Operate in accordance with the manufacturer's instruction manual
provided with each tool.
4.
Wear personal protective gear, including goggles, ear plugs and
helmet. This applies to the tool operator and bystanders in close
proximity to the firing of the tool.
5.
Do not use powder actuated tools in explosive or flammable
environments.
ª
6.
When the powder actuated tool is used in a confined space,
ensure area is ventilated.
7.
Prior to use, the operator shall inspect the tool as specified in the
manual to determine that it is in proper working condition.
Tools found not to be in proper working condition shall be serviced in
accordance with the instruction manual.
8.
If a tool is found to be defective, it shall not be used, but shall be
marked "Repair". Makeshift repairs or alterations shall not be made
to any tool. Refer to “maintenance” on page 5.
9.
When fastening directly into concrete or steel, use the proper
stabilizer or guard, suited for the application.
