.300 FLAT-HEADED FASTENERS
5/16" FLUTED GUIDE WASHERS
AFH 19 (3/4")
AFH 47 (1-7/8")
AFH 25 (1")
AFH 57 (2-1/4")
AFH 32 (1-1/4")
AFH 62 (2-1/2")
AFH 37 (1-1/2")
Knurled for Steel
SUPER POINT PINS
AFH 13K (1/2")
ASB 13 (1/2")
ASB 32 (1-1/4")
ASB 19 (3/4")
ASB 47 (1-7/8")
1/4-20 THREADED STUDS
U-14-20/12K
3/4"
1/2"
U-14-20/25
3/4"
1"
CARTRIDGES .27 Calibre Strip
In strips of 10 cartridges each:
Description
Power level
Part# (100)
Red
5 heavy
CHS R
FASTENER PENETRATION GUIDE
Soft masonry
Cinder-concrete block, etc
1-1/2" penetration
Avg. concrete
Poured concrete, etc
1" penetration
Dense concrete
Pre-stressed/pre-cast concrete
3/4" penetration
Steel
Structural steel, etc
1/2" penetration
REPLACEMENT PARTS AND REPAIR SERVICE
Your UCAN Powder Actuated Tool is precision engineered for safety.
NEVER attempt to modify parts since this can compromise the built-in
safety. When servicing, use only UCAN replacement parts. Replacement
parts are available through your local UCAN Fastening Products' Distributor.
If your tool requires service or warranty repairs, contact a UCAN Distributor,
who will determine whether the tool is field repairable or must be
forwarded to a repair center.
Owners of UCAN Tools are assured of excellent service wherever they may
be. Contact your nearest UCAN Distributor or our Technical Marketing
Services Department for assistance with fastening applications, tool
maintenance, or operator instruction for "safe tool use".
ASB 16 (5/8")
ASB 22 (7/8")
AFH 72 (3")
13
UCAN FASTENING PRODUCTS
OPERATOR'S TRAINING COURSE FOR THE LV 365
POWDER ACTUATED TOOL AND FASTENERS
NOTE:
Review of this general training course is required to become
a qualified operator of UCAN Fastening Products Powder
Actuated Tools. Review of the individual tool instruction
manuals, as well as hands on instructions on the operation
and maintenance of the specific tools are required prior to
using a Powder Actuated Tool.
14
LV 365
S/N. 00100
