CLEANING AND MAINTENANCE
Clean the parts and surfaces with the supplied brushes.
NOTE:
ALWAYS clean the tool daily or after approximately 1,000 firings.
Piston Sleeve
Piston
Guide
Internally and Externally
Externally
Internally and Externally
Baseplate
Steel Liner
Internally and Externally
Internally
Spray all parts with lubricant and wipe o
The driving power is adjusted by means of a knurled wheel on the right side
of the tool. when the indicator is in the rearmost position the greatest driving
power is obtained from a power load. Similarily, when the indicator is moved
to the foremost position the lowest driving power is obtained.
ff excess before reassembling.
NOTE:
DO NOT SPRAY the inside of the steel liner or magazine chamber
on the piston sleeve.
9
POWER REGULATION
DELUXE EQUIPMENT
Deluxe kit includes:
LV365
UCAN Fastening Products provides a set of disposable sample ear plugs
with each tool. These are not intended as permanent ear protection.
Cleaning
brushes
Lubricant
spray
Safety Goggles
Cleaning cloth
Manual
10
Parts may not be exactly as shown.
Ear Plugs
( Disposable )
Carrying Case
Spare Parts
5
5
LV 365
S/N. 00100
