Ublox MPCI-L2 series, Руководство по системной интеграции

Страница: 153 / 158

TOBY-L2 and MPCI-L2 series - System Integration Manual
UBX-13004618 - R07 Advance Information Appendix
Page 153 of 158
B.2 Pin-out comparison between TOBY-L1 and TOBY-L2
TOBY-L1 TOBY-L2
Pin No Pin Name Description Pin Name Description Remarks for migration
1 RSVD Reserved RSVD Reserved
2 GND Ground GND Ground
3 V_BCKP RTC Supply Output
2.5 V output only
RTC backup function not available V_BCKP RTC Supply Input/Output
3.0 V output
1.4 V – 4.2 V input (RTC backup) RTC back-up: No  Yes
4 RSVD Reserved VUSB_DET VBUS USB supply (5 V) detection
8
No difference: leave unconnected
as reserved or not supported
5 V_INT Interfaces Supply Output
1.8 V output V_INT Interfaces Supply Output
1.8 V output No functional difference
6 RSVD Reserved RSVD Reserved
This pin must be connected to GND No connect  Connect to GND
7-9 RSVD Reserved RSVD Reserved
10 RSVD Reserved DSR UART DSR Output 9 / GPIO 8 Reserved  UART / GPIO
11 RSVD Reserved RI UART RI Output 10 / GPIO 8 Reserved  UART / GPIO
12 RSVD Reserved DCD UART DCD Output
9
/ GPIO
8
Reserved  UART / GPIO
13 RSVD Reserved DTR UART DTR Input 9 / GPIO 8 Reserved  UART / GPIO
14 RSVD Reserved RTS UART RTS Input 10 Reserved  UART
15 RSVD Reserved CTS UART CTS Output
10
Reserved  UART
16 RSVD Reserved TXD UART Data Input 10 Reserved  UART
17 RSVD Reserved RXD UART Data Output 10 Reserved  UART
18-19 RSVD Reserved RSVD Reserved
20 PWR_ON Power-on Input
No internal pull-up PWR_ON Power-on Input
Internal 50k pull-up to VCC Pull-up: External  Internal
21 GPIO1 GPIO 11
WWAN status indication on “00”
product version
GPIO1 GPIO 8
WWAN status indication on ”00”
and “01” product versions
Wi-Fi enable on “50” version
No functional difference
22 GPIO2 GPIO 11 GPIO2 GPIO 8
23 RESET_N Reset signal Input
Internal 10k pull-up to V_BCKP
Switch-off function only RESET_N Reset signal Input
Internal 50k pull-up to VCC
Reset, Switch-on, Switch-off Internal pull-up: V_BCKP  VCC
Switch-off  Reset, Switch-on/off
24 GPIO3 GPIO
11
GPIO3 GPIO
8
25 GPIO4 GPIO 11 GPIO4 GPIO 8
26 RSVD Reserved HOST_SELECT0 Input for selection of module
configuration by the host
8
Reserved  HOST_SELECT0
27 USB_D- USB Data I/O (D-) USB_D- USB Data I/O (D-) No functional difference
28 USB_D+ USB Data I/O (D+) USB_D+ USB Data I/O (D+) No functional difference
29 RSVD Reserved RSVD Reserved
30 GND Ground GND Ground
31 RSVD Reserved RSVD Reserved
32 GND Ground GND Ground
33-43 RSVD Reserved RSVD Reserved
44 GND Ground GND Ground
45 RSVD Reserved RSVD Reserved
46 GND Ground GND Ground
47-49 RSVD Reserved RSVD Reserved
50 RSVD Reserved I2S_WA I 2 S Word Alignment 8 / GPIO 8 Reserved  I2S / GPIO
51 RSVD Reserved I2S_TXD I 2 S Data Output 8 / GPIO 8 Reserved  I2S / GPIO
52 RSVD Reserved I2S_CLK I
2
S Clock
8
/ GPIO
8
Reserved  I2S / GPIO
53 RSVD Reserved I2S_RXD I 2 S Data Input 8 / GPIO 8 Reserved  I2S / GPIO
8
Not supported by “00”, “01”, “50” product versions
9
Not supported by TOBY-L200-00S, TOBY-L210-00S, TOBY-L200-50S, TOBY-L210-50S
10 Not supported by TOBY-L200-00S, TOBY-L210-00S
11 Not supported by “00” product version