7
© 2021 Ubicquia, Inc.
6.4
Once fully inserted into the socket,
rotate the UbiHub toward the
pole to lock the NEMA connecter
in place. Stop once the clamp is
aligned with the pole.
6.5
Close the clamp around the
pole by rotating the clamp latch
upward and securing with the
swivel locking nut. Use the 1/2”
deep drive socket to tighten the
locking nut to 40 in-lbs torque.
NOTE:
Make sure the NEMA plug
and NEMA socket remain parallel
during installation.
6.6
Adjust the clamp vertically so
that the device is parallel with the
bottom of the luminaire to ensure
there is no undue stress or strain
on the NEMA socket.
6.7
Once unit is parallel with the
luminaire, tighten the vertical
adjustment screws to 40 in-lbs
torque using the 3/16” Hex bit.
6.8
Tighten the horizontal adjustment
screws to 40 in-lbs torque using
the 3/16” Hex bit.
3/16”
3/16”
15°
1/2”
