8
© 2021 Ubicquia, Inc.
6.9
Once all the mounting clamp
screws are tightened, remove the
tether from the unit.
6.10
APAI:
Remove all the protective
packaging material from the dual-
camera.
Install the dual-camera over
the mounting clamp vertical
adjustment screws by tabbing
in the bottom hook and rotating
inward. Once in place ensure that
the camera cable is not crimped
or pinched.
AP6:
Reinstall the clamp
adjustment cover set aside in
step 3.3 over the mounting clamp
vertical adjustment screws by
tabbing in the bottom hook and
rotating inward.
WARNING:
Be sure to remove
the red protective film from
the dual-camera lenses. The
dual-camera will not operate
otherwise.
6.11
Tighten the top screw of the
dual-camera or clamp adjustment
cover to 15 in-lbs torque using the
3/16” Hex bit.
3/16”
