5
© 2021 Ubicquia, Inc.
4.1
Attach the provided grounding cable
to the UbiHub housing using the
grounding screw with a standard
screwdriver or 5/16” socket.
4. Preinstall Grounding Cable
NOTE:
Installer can use the provided
grounding cable or their own
grounding cable, strap, or other pre-
installed method.
5/16” or
5. Mounting the Unit
5.1
AP6:
Gently lift the UbiHub from
the shipping box. Then flip the unit
over so the clamp is facing down.
Make sure clamp is open with
the swivel locking nut up out of
the way before installing on the
luminaire.
APAI:
The dual-camera is shipped
pre-installed to the UbiHub unit
via a cable. Gently lift the unit from
the shipping box ensuring the
dual-camera is removed as well.
Then, flip the Ubihub over so the
clamp is facing down and place the
attached dual-camera on top.
3.9
Both the mounting clamp and
inserts are marked with a 1 and 2.
Match the 1 insert with the 1 clamp
piece and the 2 insert with the 2
clamp piece. Align and firmly press
the inserts into place to ensure the
inserts fully adhere.
CAUTION:
Be careful not to
swing, slam, or knock the
camera during installation. The
camera should be placed atop
the unit during install, whenever
possible.
NOTE:
The camera is shipped
wrapped in protective packaging.
Do not remove the protective
packaging until instructed to.
1
2
