10
© 2021 Ubicquia, Inc.
A.2
If applicable, remove the fiber
protection from the fibers in the
optical cable and plug into the
SFP module.
B.
ETHERNET BACKHAUL
B.1
Insert the Ethernet cable into
the Ethernet port designated on the
Ubihub back panel.
A.3
Insert the SFP module into
the SFP port designated on the
UbiHub back panel.
A.4
Remove the gasket plug and
seat the optical cable into the
appropriate gasket opening.
B.2
Remove the gasket plug
and seat the Ethernet cable
into the appropriate gasket
opening.
8.4
If connecting an IoT accessory
continue to section 9. Otherwise
close the UbiHub rear access
door and secure by
tightening the two
screws using a #2
Phillips screwdriver.
#2
