4.2.2 Gateway - Setup
Ubee Interactive
28
DDW2600 Wireless & DDC2700 Commercial Cable Modem/Router Subscriber User Guide • May, 2010
4.2.2
Gateway - Setup
The
Setup
option allows you to make key network configurations to the device.
1. Access the web interface. Refer to
page 14
, if needed.
2. Click the
Gateway
link from the top of the screen.
3. Click
Setup
from the left side of the screen. The
Setup
fields are explained
following this screen example.
Label
Description
LAN IP Address
Defines the local IP address, which will be the default
gateway address for all wired LAN hosts that connect to
the cable modem.
MAC Address
Displays the LAN interface’s hardware address.
WAN IP Address
Displays the current WAN public IP address that is
obtained from the service provider.
WAN MAC Address
Displays the WAN interface’s hardware address.
Duration
Displays the accumulated time since successfully acquiring
a WAN public IP address.
Expires
Displays the remaining time before the expiration of the
WAN IP address, if applicable.
Release WAN Lease
Click to release the WAN public IP address.
Renew WAN Lease
Click to renew the WAN IP address.
Refresh
Click to refresh the status of this page.