4.1.6 Modem - Operation Config
Ubee Interactive
24
DDW2600 Wireless & DDC2700 Commercial Cable Modem/Router Subscriber User Guide • May, 2010
4.1.6
Modem - Operation Config
This section explains how to use the
Operation Config
screen of the web interface.
The
Operation Config
screen displays general information on the device’s active
operational capabilities.
1. Access the web interface. Refer to
page 14
, if needed.
2. Click the
Modem
link from the top menu and then the
Operation Config
link from
the left side of the screen. Field explanations are listed below the following screen
example.
4.1.7
Event Log
This section explains how to use the
Event Log
screen of the web interface. The
Event Log
screen displays log information that may be useful to diagnose operational
issues with the device.
1. Access the web interface. Refer to
page 14
, if needed.
2. Click the
Event Log
link from the left side of the screen. Field explanations are
Label
Description
Network Access
Displays the status of cable modem, Denied means no
connectivity is established. Allowed means connectivity is
established to Internet.
Maximum Downstream Data
Rate
Displays the maximum downstream data rate.
Maximum Upstream Data
Rate
Displays the maximum upstream data rate.
Maximum Upstream
Channel Burst
Displays the maximum upstream Channel burst
Maximum Number of CPEs
Displays the maximum number of Ethernet devices that
can be connected (LAN side) to access the
network/internet at the same time.
Modem Capability
Displays device attributes that indicate aspects of its
throughput and latency.
Allowed