UAZ UAZ-31512, Инструкция по эксплуатации

Страница: 95 / 113

95
5. Lubricate the springs with a graphite lubricant.
7. Check, clean the tools, accessories and spare part set and
wrap them with oiled paper or with cloth.
8. Seal the external cab glasses with light-tight paper (cloth)
or shut with shields.
9. Remove the wheels for automobile, clean the wheel disks
of dirt and touch up the areas with damaged paint. Clean, wash
and wipe dry the tyres, and bring the tyre inflation pressure to
normal.
10. If required, flush out the fuel tanks and fill them with fuel.
11. Prepare the battery for storage as is specified in the
maintenance manual of lead-acid batteries.
12. Seal the slits of the air cleaner and the muffler exhaust
pipe with oiled paper.
13. Loosen the tension of the fan driving belt.
14. Drain the coolant from the engine cooling system and the
fluid from the windshield washer reservoir.
15. Seal the transfer box and housings of the front and rear
axles for each purpose, wrap the safety valves with the insulating
tape.
16. Clue the clearances between the brake drums and backing
plates with oiled paper.
17. Protect the tyres and other rubber parts from action of
direct sunlight.
18. Put under the axles the metal or wooden props, that the
wheels would be raised above the surface.
Unload the springs; for that put the wooden struts between
the frame and axles. The preservated automobile should be
located in a clean, ventilated room with relative humidity 40-
70% and temperature not less + 5°C.
Do not keep chemically aggressive substances such as acids,
alkalis and other in one location with the automobile.
Maintenance of Automobile Placed in Storage
Once in two months, carry out the following operations:
1. Carefully inspect the automobile from the outside.
2. Unscrew the spark plugs and shift in the first gear of the
gearbox and the low range of the transfer box, then turn the
crankshaft with the starting lever through 15 of a turn. Once a