UAZ UAZ-31512, Инструкция по эксплуатации

Страница: 23 / 113

23
The rear triple seat (Fig. 17) is of a folding type and has two
separate seat backs (on the automobiles ÓÀÇ-31514, ÓÀÇ-
31519, ÓÀÇ-3153 the seats are provided with headrests). To fold
the triple seat:
- remove the headrests;
- unfasten the safety belt attachment of the rear seat (refer to
the section "Safety Belts" below);
- release the back locks by pulling the handle 8 of the lock, tilt
the backs to the seat cushions and fasten them in this position;
- turn the seat on pivots of the seat legs and hinge it out forward
(unscrew the fly nuts 10 (Fig. 17a) and unfasten the seat locks
by pulling the lever 9 on automobiles ÓÀÇ-3153). Such a
position makes it possible to enlarge the cargo area of the body.
The rear single seats (Fig. 18) are provided with a separate
back and cushion. The back is secured unmovable to the body
side panels, the cushion may be hinged out upward and secured
by straps. In the service position the single seat cushion are fixed
by pins in rubber sockets. The automobiles ÓÀÇ-3153 are
equipped with the side double seats.
Fig. 16. Front Seat of Automobiles
ÓÀÇ-31514, ÓÀÇ-31519, ÓÀÇ-3153:
1 -seat longitudinal movement adjust-
ing lever; 2 -seat back tilt adjusting
knob; 3 -waist support adjusting knob
Fig. 15. Front Seats of Automobiles
ÓÀÇ-31512
1 -seat; 2 -front attachment bolt; 3 -rear
attachment bolt; 4 -seat back attachment bolt
for tilt adjustment