UAZ UAZ-31512, Инструкция по эксплуатации

Страница: 96 / 113

96
year before turning the crankshaft lubricate the engine cylinders
with 30-50 drops of engine oil.
3. Clean and paint corroded areas, if any are detected.
4. Rotate the steering wheel from lock-to-lock position for
2-3 times.
5. Check the service and parking brakes, clutch, choke and
throttle valves, manual and foot-operated linkages of the throttle
valve, headlamp switches for proper functioning.
6. Check the level of working fluid in the reservoirs of the
brake master cylinder and the hydraulic clutch master cylinder,
and if required, top up to normal.
7. Inspect the ignition distributor, and if required, lubricate
its metal parts.
8. Check the tools and accessories if required, wipe and
lubricate them.
9. Check the condition of tyres and other rubber parts.
10. Eliminate the troubles detected during inspection.
Depreservation
1. Remove the preservative lubricant from the parts for which
purpose, wash them with kerosene or clear gasoline. Remove the
lubricant from areas which may come in contact with rubber
parts or painted surfaces.
2. Carry out daily maintenance.
3. Check the level of oil in the engine crankcase and drain
an excess amount of oil.
4. Before engine starting lubricate each cylinder with 30-50
drops of engine oil and turn the crankshaft with the starting lever
through 10-15 of a turn.
TRANSPORTATION
The automobiles are moved depending on the user location:
by water, rail or air. The transportation of the automobiles by
the course is allowed.
When moving the automobiles in the hold or on the desk of
shipes, and also by air make them fast in accordance with the
ship scheme or air transport scheme. Use appliances, which not
damage the parts and paint of the automobile.