41
Accelerator pedal.
While in service, it may become necessary
to adjust the carburettor throttle full opening and readjust the
accelerator pedal position. If the pedal is pressed all the way
down and the throttle is not fully open, shorten the pedal rod
rotating adjusting sleeve 3 (Fig. 35). Shorten it to such a length
that full opening of the carburettor throttle is ensured but
compensating spring at the same time is not completely
compressed.
When released, the accelerator pedal should be at a distance
of 80-95 mm from the toeboard. If the threaded portion length
of the accelerator pedal rod is not sufficient for the adjustment,
change the length of rod screwing it out of the rod end.
As required, lubricate the carburettor manual control linkage
with lubricating grease. Before lubrication, remove it from the
automobile and take off old grease.
Fig. 33. Air Cleaner:
1 -muff; 2, 10 -yokes; 3 -body of air
cleaner; 4 -flame damper; 5 -filter element;
6 -cover with filter element frame; 7 -sealer;
8 -contracting bolt; 9 -cover attachment
clamp; 11 -air intake hose
Fig. 34. Manifold
Heat Control Valve:
I -heat control valve
OFF (summer);
II -heat control
valve ON (winter)
Содержание UAZ-31512
Страница 8: ...8 Fig 3 Overall Dimensions of Automobile ÓÀÇ 3153 Dimensions are given for reference ...
Страница 99: ...99 Fig 88 Lubrication and Tank Chart of Automobile ...
Страница 110: ...FORNOTES ...