UAZ UAZ-31512, Инструкция по эксплуатации

Страница: 86 / 113

86
For deaerating, unscrew the bolt of the cylinder C, press the
gun handle until grease is emerged and tighten the bolt.
The capacity of the chamber B is 340 cm
3
of grease.
The Jack (Fig. 79) is designed to jack up the automobile
wheels for maintenance. The jack load-lifting capacity is 2 t. The
maximum height of lifting is 240 mm.
For jacking up the wheel, proceed as follows:
1. Install the jack on a level ground under the axle shaft
sleeve.
2. Turn out the jack internal screw 3 as high as the clearance
between the axle shaft sleeve and the ground permits.
3. Throw over the jack latch 5 to the l.h. side relative to the
jack handle 6 so that the latch projection enters the tooth space
of the ratchet wheel 7.
Fig. 79. Jack:
1 -body; 2 -external screw;
3 -internal screw; 4 -head;
5 -pawl; 6 -handle; 7 -ratchet