UAZ 2001 ???-2206, Инструкция по эксплуатации

Страница: 57 / 112

57
CHASSIS
Towing Hook
The towing hook is intended for towing a trailer or an
automobile by means of flexible coupling, and also it allows a
short-time operation by means of rigid coupling. Towing of a
trailer on a broken ground is not allowed.
The hook is provided with a catch 3 (Fig. 47) which closes
the mouth of hook and is locked in the closed position by means
of the pawl under the action of the spring.
The pawl in the catch is closed by a cotter 4 to avoid
spontaneous uncoupling.
Maintenance of the towing hook comes to periodically
cleaning of dirt, checking it for reliable attachment to the rear
cross-member and lubricating according to the directions of
Lubrication Table.
Fig. 47. Towing gear of rigid type:
1 -case; 2 -pawl; 3 -catch; 4 -cotter pin; 5 -chain
Maintenance of the Suspension
Periodically check the condition and attachment of the
springs and shock absorbers (Fig. 48). To prevent corrosion and
eliminate squealing noise, lubricate the spring leaves at least
once a year. To lubricate the springs, remove them from the
automobile, disassemble, wash in kerosene, dry and lubricate
each leaf with a grease according to Lubrication Table.
Squeaks in the spring eyes are symptoms of worn-out rubber
pads.