UAZ 2001 ???-2206, Инструкция по эксплуатации

Страница: 91 / 112

91
3. Clean and paint corroded areas, if any are detected.
4. Rotate the steering wheel from lock-to-lock position for
2-3 times.
5. Check the service and parking brakes, clutch, choke and
throttle valves, manual and foot-operated linkages of the throttle
valve, headlamp switches for proper functioning.
6. Check the level of working fluid in the reservoirs of the
brake master cylinder and the hydraulic clutch master cylinder,
and, if required, top up to normal.
7. Inspect the ignition distributor, and if required, lubricate
its metal parts.
8. Check the tools and accessories, if required, wipe and
lubricate them.
9. Check the condition of tyres and other rubber parts.
10. Eliminate the troubles detected during inspection.
Depreservation
1. Remove the preservative lubricant from the parts for
which purpose, wash them with kerosene or clear gasoline.
Remove the lubricant from areas which may come in contact
with rubber parts or painted surfaces.
2. Carry out daily maintenance.
3. Check the level of oil in the engine crankcase and drain
an excess amount of oil.
4. Before engine starting lubricate each cylinder with 30-50
drops of engine oil and turn the crankshaft with the starting lever
through 10-15 of a turn.