UAZ 2001 ???-2206, Инструкция по эксплуатации

Страница: 42 / 112

42
warmed up. The screw 2 is used for adjusting the CO content.
After adjustment done, place on the adjustment screw a new
cap, that the content of mixture could be only leaning (by
screwing in the cap). It is recommended to adjust the screw
2 only by special tools for analysing of exhaust gases.
Air cleaner. When the automobile is to be operated under very
dusty conditions, carry out the maintenance of the air cleaner
in the intervals between servicing according to Coupons.
Do not clean the filter element more than 15 times. For
cleaning, use the following ways: wash the filter element with
water adding syntetic washing agent and then rinse it, wring
gently out and dry; blow it out or clean by shaking off.
For replacing or cleaning the filter element, proceed as
follows: loosen bolts 8 (Fig. 29) and yoke 2; shift clamps 9; take
away cover 6 with filter element 5; take away yoke 10 and filter
element from frame. Assembly the air cleaner in the reverse
order.
Never use the air cleaner with defective muff 1.
Replace the filter element when bursting or burning the filter
Fig. 28. Carburettor (fragment):
1 -idle speed adjustment screw; 2 -idle mixture
adjustment screw
Fig. 29. Air cleaner:
1 -muff; 2, 10 -yokes; 3 -air cleaner
body; 4 -flame damper; 5 -filter
element; 6 -cover with filter element
frame; 7 -sealer; 8 -contracting bolt;
9 -cover attachment clamp