SKU 97706
For technical questions, please call 1-800-444-3353.
PAGE 22
INSPECTION, MaINTENaNCE, aND CLEaNINg
1.
CaUTION!
Make sure to wear ANSI-approved safety impact goggles before
performing any inspection, maintenance, or cleaning of Pressure Test Kit.
Before each use:
2.
Inspect the general condition of the Pressure Test Kit. Check
for damaged parts, and any other condition that may affect this product’s safe
operation. If a problem occurs, have the problem corrected before further use.
Do not use damaged equipment.
To clean:
3.
Use a clean, soft, damp cloth, and mild detergent. Then, allow to air-
dry. Do not use solvents.
4.
CaUTION!
All maintenance, service, and repairs not discussed in this manual
should only be performed by a qualified service technician.
PLEaSE REaD THE FOLLOWINg CaREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY
DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR
DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE
OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER
AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS
SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER.
THE BUYER ASSUMES ALL RISKS AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE
ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER
INSTALLATION OF REPLACEMENT PARTS THERETO.
