U.S. General 97706 Скачать руководство пользователя страница 5

SKU 97706  

      For technical questions, please call 1-800-444-3353. 

PAGE 5

UNPaCKINg

When unpacking, check to make sure all the parts shown in the 

Parts List on page 23

 

are included.  If any parts are missing or broken, please call Harbor Freight Tools at the 

number shown on the front cover of this manual as soon as possible.

aPPLICaTIONS

#

Picture

DESCRIPTION

aPPLICaTION

1

Basic gauge with Boot

and Hook - 100 PSI

Connects to #8 for basic testing

2

general Motors 2.5L & 5.7L

(Non Multi-Port)

For vehicles with quick connect fuel filters such as

2.5L Oldsmobile Ciera 1989 & up, and 5.7L

Chevrolet Caprice 1991 & up

3

general Motors 2.2L

(Non Multi-Port)

1992 & up: Chevrolet Cavalier, Pontiac Sunbird, Buick 

Skylark, and Quad 4 equipped Pontiac grand am

4

Hose Clamps and

Connection Hoses

For use in making certain hook up connections

5

general Motors Throttle

Body Injection (TBI)

Inline Adapter - Replaces fuel filter with threads on

both ends

6

Parts

Seals, Tank Valve, and gasket

7

Double End Barbed Hose

adapter

When vehicles require testing by splicing into 1/4”,

5/16”, or 3/8” fuel line hose

8

Single End Barbed Hose

adapter

all vehicles requiring end of line testing with 1/4”,

5/16”, or 3/8” fuel line hose

9

Honda, acura & Sterling

Multi-Port (PgM-FI)

For vehicles with 6mm-1.00 fittings

10 

THRU 

14

asian and European vehicles 

with Multi-Port & Bosch aFC

For vehicles with 8mm-1.00, 10mm-1.00, 12mm-1.25,

12mm-1.50, & 14mm-1.50 Banjo Bolts

15 

THRU 

24

E & K Jetronic Systems

Test CIS (Continuous Injection Systems) found on Eu-

ropean cars and Volkswagon models assembled in the 

U.S.  For vehicles with metric threads

CISE

Test CISE (Constant Injection System Electronic) found 

on European cars with metric threads

25

Pressure Testing and

Bleed-off assembly

For use in performing tests with Basic gauge (1)

and adapters

26

Ford Multi-Port (EFI)

For smaller Schrader valves

27

general Motors, Chrysler

& Imports with 7/16”-20

threaded test port

For larger Schrader valves on Multi-Port vehicles

28

Ford CFI

For 5/16” hair pin connections

29

general Motors and

Chrysler Inline adapter

Inline adapter for vehicles with 3/8” hair pins

30

Ford EFI

For Spring Lock fittings

31

CIS Testing assembly

with Ball Valve

For use in testing with Basic gauge (1), Pressure

Testing, and Bleed-off assembly (25) and adapters

Содержание 97706

























Отзывы: