SKU 97706
For technical questions, please call 1-800-444-3353.
PAGE 12
Remove the fuel filter by unscrewing the steel fuel line from one end of the fuel
4.
filter. Remove the nylon fuel line on the other end by compressing the tabs while
pulling outward on the fuel line. Use a container to catch any fuel that may spill
out. Wipe off any excess fuel that may spill out.
Install the fuel pressure Adapter (3) in place of the fuel filter by threading the steel
5.
fuel line into the threaded end of the Adapter. Do not overtighten. Connect the
other end of the Adapter by pushing the male tube into the nylon fuel line. Make
sure the nylon clip on the tube is seated inside the fuel line connector.
Connect the Gauge (1) to the Pressure Testing and Bleed-off Assembly (25).
6.
Attach the female quick coupler on the Pressure Testing and Bleed-off Assembly
7.
(25) to the male quick coupler on the Adapter (3).
Start the engine and check for leaks. Read the fuel pressure. Compare the
8.
value on the Gauge (1) to the value in the service manual.
Stop the engine and turn the ignition OFF.
9.
With free end of bleed-off hose in a suitable container, press button on side of
10.
bleed-off assembly slowly to de-pressurize the fuel system.
Refer to
11.
General Safety Rules
section before removing tester from vehicle.
Remove the fuel pressure Adapter (3) following the above instructions for remov-
12.
ing the fuel filter. Re-install the fuel filter. Start the engine and check for leaks.
