15
When the ordinary card is passed if door is in "Blocking” Mode, "Access denied.
Blocked state” event recoded. Card with attribute “Security Service" pass. If the card
is valid and has access right at the moment, the panel gives access and event
“Access granted. Blocked state» is registered.
VIP
Access right to pass always everywhere, except through blocked door.
VIP card may be assigned any schedule, Antipassback and validity period is NOT
applied to it. The card may have PIN code
If the door is in “Blocked state", access is denied for RF ID with this attribute
checked.
Antipassback is off
Access right without considering Antipassback Mode.
Access is granted regardless of the direction of the previous access, but due to the
schedule and other attributes designated to the Card.
Variants of Use and modes of output
All panel outputs can be programmed in any order for several functions: Blocking,
Siren, Alarm, Programmable output. In addition, there is programmable operation
mode for each output: start-stop (output remains active until the corresponding
command is present, for example, during the time until the panel is in "Alarm" Mode),
impulse (the output is activated for the programmed time), trigger mode (on the first
event the output is activated, on the following is off, etc.), continuous.
The communicator
U-Prox IP400 panel operates automatically - after downloading data from the server,
it processes the card passed according to its access rights, grants or denies access
and sends event rehire to the ACS server.
Panel communicator operates in the
notification
mode. If there is event (passage,
violation of input) event report message is send ACS server.
U-Prox IP400 panel can be connected to a computer network via wired connection
(Ethernet). This ensures work within local network (see Figure 3) or via the Internet
(see Fig. 4), that allows to build distributed access control systems of any size.
Fig. 3.
An example of a local network