29
Crossover (directly to the computer network card)
Fig.18.
Connecting cable
Ethernet
1. white-yellow
1. white-green
2. yellow
2. green
3. white-green
3. white-yellow
4. blue
4. blue
5. white-blue
5. white-blue
6. green
6. yellow
7. white-brown
7. white-brown
8. brown
8. brown
To configure the Ethernet device of access control panel:
Enable Ethernet communication
Set network parameters of panel (do not set if you use DHCP):
o
IP address
o
Subnet Mask
o
IP address of the gateway (router) Internet 1 (not necessarily in
the local area network)
o
IP address of the gateway (router) to the Internet 2 (optional)
o
IP address of the DNS Server 1 (if data transfer of the domain
name is used)
o
IP address of the DNS Server 2 (optional, if data transfer of the
domain name is used)
Setting communication with server:
o
IP or DNS address server 1
o
IP or DNS address server 2 (address of U-Prox IC A panel,
optional)
o
Access Ports (port to read and port to write)
o
Period of the link channel checking (test signal)