U-Prox IP400 Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 31

U-Prox IP400 Скачать руководство пользователя страница 13

http://u-prox.com

13



Cards (RF IDs) and schedules are not loaded in the panel (light off)



access control panel is in unloaded state



card is not enrolled in the panel



card term expired (for 1 second buzzer is on and LED is red )



RF ID passed out of schedule (for 1 second buzzer is on and LED is red)



attempt to re-pass when "Antipassback" is on (for 1 second buzzer is on
and LED is red)



entered RF ID is marked as lost or blocked (for 1 second buzzer is on and
LED is red)



the panel is in "Alarm" mode (LED is constantly on and red)



the panel is in "Blocked" mode (LED flashes red and yellow)



Pass count is exhausted for the temporary card (visitor).

“Alarm” Mode

In "Alarm" mode the reader indicator is constantly red. Depending on the
programmed functions Access point goes into mode

"Alarm"

in case of

unauthorized passage (Door Forced Open), opening of panel cover, entering RF ID
recorded as lost, if AP is open too long (open time AP is exceeded), and in case of
RF ID matching attempt.

In "Alarm” mode panel activates outputs, programmed as ALARM and SIREN.

"Alarm" output remains activated till “Alarm" mode is turned off. For output "SIREN",
siren time is programmable.

If Access point is in “Alarm mode", passage is prohibited. Access point may be
opened by pressing RTE.

To exit from the "Alarm" mode pass the ID with "Disalarm" attribute or by command
from the computer.

"Free Pass” Mode

There are circumstances when you need to open access points for Free pass of
people, such as in the case of fire, earthquake or in other emergency. For this case,
the panel has "Free Pass" mode.

In "Free Pass” Mode LED of reader flashes green and yellow.

The access point goes into "Free Pass" Mode after the command of operator from
the computer or after the loop violation (break or shortage) programmed as FREE
PASS. The access point is in "Free Pass" Mode for as long as the loop FREE PASS
is broken or until the command from the computer comes (while the loop is broken,
command from the computer will not work).

The panel allows to configure the function of loop "Free Pass" for access points A, B,

«
...
11
12
13
14
15
...
»

Содержание IP400
































Отзывы:

Нет отзывов