24
Z1
– Request to Exit button (RTE) of access direction A
Z2 - RTE of access direction B
For proper operation, it is necessary to assign the connected loops as RTE when
programming.
Door Contact
Control panel supervises the door state or position of the turnstile rotor wit the door
contact. Panel cannot detect unauthorized access or door is open too long (multiple
entrance with one ID for instance) without the Door Contact.
The example of normally closed door contacts connection to Z3 and Z4 terminals is
on the Fig. 13.
Fig. 13
. Connecting door contacts
Z3 and Z4 inputs function assigned as follows:
Z3 - door contact of access direction A
Z4 - door contact of access direction B
Program input as 'Door Contact' for proper operation of the door contact.
The control panel can operate without the door contact. In this case, after the
passing RF ID for identify and granting access, an event "Access granted" is
generated, the control panel send unlocking impulse, and returns to normal mode
after door time expire.
The use of button of the electric lock to open access point or "allow access"
button on the turnstile evokes the "DOOR FORCED OPEN" event
Access point, controlled by ACS, must have the door closer.