PAGE 9 OF 17
0921 IH-9560
MENU SETTINGS
The User Menu allows the customizing of scale settings.
NOTE: Additional sub-menus may be available
if Interface Options are installed.
MENU NAVIGATION
SUB-MENUS
C.A.L
S.E.T.U.P
M.O.D.E
U.N.I.T*
E.N.D
Tare
Menu
Exit
Yes
No/Back
Exit
Long Press –
Enter Menu
Short press –
Accept
Short press –
Go Next/
Prev. menu
Short press –
Exit menu
Span
Lin
Reset
Yes/No
Auxiliary
Graduation*
On/Off
Filter
Low/Med/High
AZT
0.5/1/3/Off
StableRange
0.5/1/2//5
Backlight
Off/On/Auto
Auto Tare
Off/On/On-acc
Auto Off
Off/1/5/10
Reset
Yes/No
Weighing
On/Off
Counting
On/Off
Percent
On/Off
Check
On/Off
Totalize
On/Off
Density
On/Off
Hold
Disp/Peak/Off
Reset
g
kg
ct
oz
ozt
dwt
lb
grn
hkt
sgt
twt
t
tola/tical
End
End
End
End
End
End
*Available units may vary by local regulations.
**Available settings may vary by local regulations.
When the security switch is in locked position
(See Figure 7), the menu settings are affected as follows:
• External calibration function is hidden.
• The readability will be reduced by a factor of 10
or brackets will be displayed around the last digit,
depending on the model.
• The auxiliary graduation menu will be locked.
• Units are locked to the current setting.
• Stable range locked to 1d.
• AZT locked to 0.5d.
• Zero range forced to 2%.
• Filter level is locked to current setting.
• Stable only when Print menu locked ON.
• Continuous/Interval print cannot be selected.
Figure 7
Unlocked
Locked
