PAGE 13 OF 17
0921 IH-9560
MAINTENANCE
CLEANING
WARNING! Electric shock hazard. Disconnect
the equipment from power supply before
cleaning.
The housing may be cleaned with a cloth dampened
with a mild detergent if necessary.
ATTENTION! Do not use solvents, chemicals,
alcohol, ammonia or abrasives to clean the
housing or control panel.
TROUBLESHOOTING
SYMPTOM
POSSIBLE CAUSE
Cannot turn on
No power to scale.
Poor accuracy
Improper calibration.
Unstable environment.
Cannot calibrate
Security switch in locked position.
Err 8.1
Weight exceeds power on zero range.
Err 8.2
Weight below power on zero range.
Err 8.3
Overload (weight exceeds rated capacity).
Err 8.4
Underload (pan removed).
Err 8.5
Tare out of range.
Err 8.6
Displayed value exceeds 999999 (possible
in Totalization mode).
Err 8.7
Unknown internal weight position.
rEF.Err
Parts counting or percentage error –
sample weight <1d. Scale shows error, then
exits parts counting or goes to [Clr.APU].
Lo.rEF
Percent Reference weight or APW is too low
for accurate results.
CAL E
Failure to calibrate.
USb.Err
Cannot find menu or app file in U-disk.
SERVICE INFORMATION
If the troubleshooting section does not resolve or
describe problem, contact Uline Customer Service at
1-800-295-5510.
ACCESSORIES
DESCRIPTION
ITEM NUMBER
RS232 kit
30268982
USB Host kit
30268983
USB Device Kit
30268984
Bluetooth Kit
30268985
Ethernet Kit
30268986
Stacking Kit, x6
30268987
Stacking Kit, x1
30268988
Specific Gravity kit
30269020
Auxiliary Display Kit
30269019
Carrying Case
30269021
In-Use Cover
30269022
Printers and Cables
Contact Uline
