U-Line Inspect & Plan
2
3 Inspect & Plan
Product Registration
You have received a carton containing your U-Line Clear Ice, Ice or
Ice Combo unit with a package inside containing a Use and Care
Guide, a Product Registration Card, and a water line kit. Please
complete and mail the Product Registration Card or register online
at www.U-LineService.com. Once your unit is installed, keep the
Use and Care Guide and this Installation Guide in a safe place for
future reference.
Product Description
This installation guide covers the following models.
Inspection
Unwrap and inspect the unit on a flat, level surface capable of
supporting it’s entire weight. If necessary remove protective film
from Stainless Steel models.
U-CLR2160B-00
U-CLRCO2175S-00
U-CLR2160B-40
U-CLRCO2175S-01
U-CLR2160S-00
U-CLRCO2175S-40
U-CLR2160S-01
U-CLRCO2175S-41
U-CLR2160S-40
U-CO1175B-00
U-CLR2160S-41
U-CO1175S-00
U-CLR2160SOD-00
U-CO1175S-01
U-CLR2160SOD-01
U-CO2175FB-00
U-CLR2160SOD-40
U-CO2175FS-00
U-CLR2160SOD-41
U-CO2175FS-01
U-CLR2160W-00
U-CO2175FW-00
U-CLR2160W-40
U-CO29B-00
U-CLRCO2175B-00
U-CO29FB-00
U-CLRCO2175B-40
U-CO29FWH-00
Tools / Material Required
• Screwdrivers — slotted and Phillips head
• 1/4-inch thick door panel material and cutting tools (If installing
a 1/4” Panel)
• 1/4” Nut Driver
• 5/16” Nut Driver
• Side Cutter
• Copper tubing cutter
• 12” Level
• 9/16” Open end wrench
• 7/16” Open end wrench
• Pliers
• Copper tubing
CO2175 Models Only
• Full Overlay Door Panel Kit. Part number U-OL2175B (black
units) U-OL2175W (white units)
A complete water hook up kit is also available for purchase from
your dealer. Order U-Line Part No. WATERHOOKUP.
Exterior Cleaning
Black and White Models:
• Black and White surfaces may be cleaned with a mild detergent
and warm water solution. Do not use solvent-based or abrasive
cleaners. Use a soft sponge and rinse with clean water. Wipe
with a soft, clean towel to prevent water spotting.
Stainless Models:
• Stainless door panels, handles and frames can discolor when
exposed to chlorine gas, pool chemicals, salt water or cleaners
with bleach.
• Keep your Stainless unit looking new by cleaning with a good
quality all-in-one stainless steel cleaner/polish on a monthly
basis. For best results use Claire Stainless Steel Polish and
Cleaner, which can be purchased from U-Line Corporation
(Part numbers 173348). Frequent cleaning will remove surface
contamination that could lead to rust. Some installations may
require cleaning on a weekly basis.
• Do not clean with steel wool or abrasive pads.
• Do not use cleaners that are not specifically intended
for stainless steel on stainless surfaces (this includes
glass, tile and counter cleaners).
• If any surface discolors or rust appears, clean it quickly with
Bon-Ami or Barkeepers Friend Cleanser and a non-abrasive
cloth. Always clean in the direction of the grain. Always finish
this process with Claire Stainless Steel Polish and Cleaner or
comparable product to prevent further problems.
WARNING
Rust that is allowed to linger can penetrate into the
surface of the stainless steel and complete removal of
the rust may not be possible.
