TYROLIT Hydrostress AGE230, Руководство по эксплуатации

Страница: 16 / 110

16 AGE230
TYROLIT
Technical data
Symbols used in this manual
Symbols on the power tool
Overview (Figure A)
1 Switch
Switches the power tool on and off.
2 Starting lockout/Locking button
Prevents the power tool from starting up unintentionally
and locks the switch during continuous operation.
3 Quick-clamping lever
4 Spindle
5 Threaded flange
a Clamping nut
b Clamping flange
6 Guard
7 Gear head
With air outlet and direction-of-rotation arrow.
8 Auxiliary handle
Side handle can be fitted on the left, the top or the right.
9 Spindle lock
Secures the spindle when the tool is changed.
10 Switch handle
11 4.0 m power cord with plug
12 Stop key
13 Rating plate (not shown)
Operating instructions
Before switching on the angle grinder
Unpack the angle grinder and check that there are no missing
or damaged parts.
Figure B:

Connect the guard to the clamping flange with the clamping
ring by inserting the cam on the clamping ring into the
groove on the flange ( 1. ).
Figure C:

Rotate guard hood into the required position ( 2. ) and tight-
en clamping lever ( 3. )

Attaching the auxiliary handle.
Switch on and off
Brief operation without engaged switch rocker
(Figure D)

Press and hold down the starting lockout ( 1. ).

Press the switch ( 2. ).

To switch off, release the switch.
Continuous operation with engaged switch rocker
Figure E:

Press and hold down the starting lockout ( 1. ).

Press and hold down the switch ( 2. ).

Press the locking button ( 3. ).
Figure F:

To switch off, briefly press and release the switch.
Adjusting the quick-release guard (Figure G)

Loosen the clamping lever ( 1. ).

Adjust the guard ( 2. ).

Retighten the clamping lever ( 3. ).
AGE230
Ø max mm 230
mm M14
n 1/min 6,500
P
1
W 2,100
m „EPTA Procedure 01/2003“ kg 4.9
L
pA
dB(A) 93
L
WA
dB(A) 104
K dB(A) 3
a
h, SG
m/s
2
5.1
K dB(A) 1.5
WARNING!
Denotes impending danger.
Non-observance of this warning may result in death or extre-
mely severe injuries.
CAUTION!
Denotes a possibly dangerous situation.
Non-observance of this warning may result in slight injury or
damage to property.
NOTE
Denotes application tips and important information.
Before switching on the power tool, read the
operating manual!
Wear goggles!
Wear ear protection!
Protection class II (completely insulated)
Disposal information for the old machine
(see page 17)
WARNING!
Before carrying out any work on the angle grinder, always pull
out the mains plug.
WARNING!
Before carrying out any work on the angle grinder, always pull
out the mains plug.
When using the angle grinder for roughing or cutting, never
work without the guard.
A special cutting guard must be used for cut-off grinding.
CAUTION!
Risk of injury! Wear protective gloves!