Tycon Power Systems EZ-Go +, Руководство пользователя

Страница: 10 / 16

10
eave, if possible. Of course if line of sight is better with the antenna
mounted in a non - protected environment then we would recommend
the better line of sight mounting location.
5. LIGHTNING – Lightning is the single worst enemy of outdoor elec-
tronics equipment. No electronics will survive a direct strike but there
are close proximity strikes that can cause huge electrical fields to be
generated which can damage electronic equipment. We have taken
special care in the design of the EZ - Go
®
unit to ensure proper ground-
ing of the electronics inside the enclosure to prevent damage from elec-
trical storms. Make sure that the PoE Power Supply is plugged into a
surge protected outlet such as a surge protected power strip or UPS
inside the house. Shielded CAT5/6 cable is also recommended be-
tween the PoE Inserter and antenna.
6. PAINTING – The EZ - Go
®
unit can be painted to match a particular
house color. Only non metallic enamel or latex paints should be used. If
a paint with metal content is used, it will block the microwaves and
cause reduced performance.
7. COMMON MICROWAVE BARRIERS – Tinted windows are made by
applying a metallized film to the window. If a window has tinting, it will
usually block the microwaves and cause reduced performance of the
EZ - Go
®
. Concrete walls are also a significant barrier to microwave sig-
nals. Aluminum siding on houses is also a barrier to microwave signals.
Wood frame houses covered with brick or stucco are pretty transparent
to microwave signals and they will reduce the signal strength but the
signal will still pass thru the structure. We are bringing this up to you so
you can better understand possible causes of performance issues
8. VOICE OVER IP (VOIP) – The EZ - Go
®
supports all VOIP standards
making it possible to use VOIP phones across any EZ - Go
®
link.