Tyco Electronics FOSC-600 C, Руководство по установке

Страница: 13 / 16

13
3.8.7 Turn the trigger of each gel block clockwise till the physical
stop. Insert a screwdriver through the loop in the trigger to apply extra
torque, if required.
3.9 Adding a cable to an existing closure
3.9.1 Loosen each installed gel block by turning the trigger counter
clockwise. Insert a screwdriver through the loop of the trigger to apply
extra torque, if required.
3.9.2 Unlatch each of the latches in order, using a screwdriver.
Hooks must be completely disengaged and in the up position so they
don’t trap the closure cover in place.
3.9.3 Loosen the captured bolts at each end of the closure.
3.9.4 Lift up the top half of the closure and set it aside. From here
follow the section “installing cable”.
3.10 Mounting the closure
A Wall mounting.