
http://www.CompeGPS.com http://Support.CompeGPS.com 71
Force recording after navigation selection:
When a new navigation is
started, the recording of the track is also started (
'Triplog'
), no need to
press
'Triplog > Record'
each time.
Stop navigation when stop recording
'Triplog'
:
When the recording of
the
'Triplog'
is stopped, the current navigation is also stopped.
Show
'Trip review'
when stop recording
'Triplog'
:
'Trip review'
(properties of the recorded track) is not shown after the current
‘Triplog’
is
stopped.
Reset
'Triplog'
recording when changing navigation:
When a new
navigation is started, the recording of a new track is also started (
'Triplog'
).
Note:
TwoNav synchronizes at the same time the recorded track, the recorded
data fields and navigation (destination) to simplify the general use of the
application, but in some cases, you may prefer that some synchronization points
are disabled.
8.10 Autonomy
Maximize the autonomy of your device while running TwoNav:
Battery level
Shutdown screen:
Time interval to automatically switch the screen off.
Do not shutdown if plugged:
If enabled, screen shutdown time is not
applied, leaving the device with the screen on during all the trip.
Connection interval:
Improve the autonomy of the device by setting the
connection interval of the GPS.
Disconnect GPS when stop:
TwoNav will detect a stop in your itinerary
and will automatically disconnect the device.
Protection against unplug:
In order to prevent the device from
discharging, in case it is disconnected accidentally from the power source,
TwoNav will detect the unplugging. If no interaction is done, TwoNav will
shut down after 30 minutes.
AA battery:
Set the type of battery you are using in your device, so that
TwoNav can properly estimate the battery level
.
8.11 Communications