http://www.CompeGPS.com http://Support.CompeGPS.com 70
Automatic:
Track points will be automatically recorded when
changing course and depending on the speed.
Weak signal filter:
If GPS signal is not reliable, points are ignored while
recording track. This prevents the recording of non reliable data.
Save discard
‘Tracklog’
in trash:
If enabled, when options
'Pause'
or
'Finish trip'
are pressed, your following movements will be automatically
recorded as backup track copy inside
‘TwoNavData/Data/Tracklog/Trash’
folder.
This is a security system in order to avoid losing tracks in case you
forget to start
‘Triplog’
function.
Recovery time:
When TwoNav is suddenly switch off, if you turn the
device on during the established interval, the previous data is recovered
and displayed again.
8.9.2 Display
Show current
‘Tracklog’
on map:
If enabled, the track that is being
recorded will be shown on the map window.
Show current
‘Tracklog’
in list:
If enabled, the track that is being
recorded will be listed in track list marked with
‘*’
(
‘Main menu > Data >
Tracks’
).
Track color:
Set the colour for the generated track.
Thickness:
Set the thickness for the generated track.
Points shown without reduction:
Recorded track is visible on map
window, but only the latest points of the track are shown as they are
recorded (with no reduction of points). Set how long this section is.
Reduction for previous points:
It is highly recommended to make a
reduction of the rest of the displayed track as well. Set a reduction to
display the previous points of the recorded track (all except the latest
points).
Important:
These reductions does not affect the resulting track file (it will
keep all points). These functions only concern the track being displayed on
screen in order to save memory.
8.9.3 Synchronization with navigation
Select navigation when start recording
'Triplog'
:
When
'Triplog > Start!'
is pressed, destination can be chosen from several options.