http://www.CompeGPS.com http://Support.CompeGPS.com 65
Leg type:
Enable/Disable the division of the track in equal legs portions
(either by distance, time or aerial conditions).
Interval for leg analysis:
Set the default value to create the division of
the track in legs. Once you have reached the default value, a brand new
leg will start lasting the same as the interval value.
Alarm on leg change:
TwoNav can display a visual warning (pop up
window) each time you complete a leg.
Information on leg change:
If
'Alarm on leg change'
is enabled, define
which data field you want to displayed at the pop up window. This value
has been recorded during that specific leg.
Note:
You can also start a brand new leg at any moment pressing 'Change leg'
at the tool bar.
8.5.4 Waypoints
When you are getting close to any waypoint you can set an alarm to warn you:
Default radius for waypoints:
Waypoint alarm will be displayed when
you are entering into the radius of any waypoint. Set that radius according
to your preferences.
Audible alarm at waypoints:
Fix also a warning sound.
Start screen at waypoints:
The screen of your device will be turned on
when entering into the radius of any waypoint.
Auto-play associated images/sounds/text/videos:
Associated files can
be automatically displayed when you are entering into the radius of any
waypoint.
Important:
You may also be alerted by the Points Of Interest (POIs) that you you
store at
‘TwoNavData/POI’. If you want to be alerted when reaching one of these
POIs, each one of them will have to be associated to a image/sound/text/video
file.
8.5.5 Speedcams
TwoNav will consider the introduced files at
‘TwoNavData/Radars’
folder as
speedcams. So when you are getting close to any traffic speedcam you can set
an alarm to warn you (an updated file with current speedcams is required).