Configuring network settings for streaming media
If you want to stream media over your network, or from the internet, configure the network settings for your
Streaming media and 4K playback input module.
If you only want to use your Streaming media and 4K playback input module to play media from a USB drive, you
don't need to configure network settings.
About static IP addresses
If you want to use a static IP address, you need some information about the range of available IP addresses on
your network. Your network administrator should be able to help you.
Static IP address
If you choose a static IP address, make sure you enter a unique value for your IP address. Using the same IP address for
multiple devices can cause your devices to disconnect. Contact your network administrator for help.
To configure network settings for streaming media
1. In CORIOgrapher, select
>
Module Configuration
.
2. Find the Streaming media and 4K playback module that you want to set up, and select
>
Configure
.
3. Choose an IP configuration.
n
If you choose
DHCP
, an IP address is assigned to you.
n
If you choose
Static
, the last static IP address you saved is available to edit. If you haven't previously saved
a static IP address, default values for a static IP address are available to edit.
PDF-MWP-DYN-V1.20 tvONE
41