input module failed to update. The module status is
UPDATEFAILED
.
Why does this happen?
n
There was an error when you updated the firmware of your CORIOview™.
n
The firmware download might be corrupted.
n
There is a problem with a module.
What to do
First try this
1. Restart your CORIOview.
2. In CORIOgrapher, select
>
Module Configuration
.
3. For each Streaming media and 4K playback input module, select
>
Configure
and check the status.
Then try this
1. Download the firmware update again.
Make sure you download the correct version.
2. Repeat the firmware update.
Read more about updating your firmware
PDF-MWP-DYN-V1.20 tvONE
101