Tvone CORIOview Скачать руководство пользователя страница 107 | Manualshive

Страница: 107 / 111

background image

If that doesn't work

If the advice here doesn't work, first contact your distributor. If your distributor can't help, contact tvONE support
at

[email protected]

,

[email protected]

or

[email protected]

General troubleshooting checklist

If specific troubleshooting advice isn't helping, or your product has stopped working, go through the points
below. If your product still doesn't work, you might need to return it for repair.

Read about returning your product

1. Make sure your product is set up correctly, as shown in this guide.

2. Check that your cables and equipment are all connected firmly.

3. Check that your product is connected to an electrical outlet that is switched on.

Can you see LED lights on the front of your product?

4. Test your sources by connecting them directly to a display.

5. Test your display by connecting it directly to a source.

6. Test each cable.

7. Try restoring your product to factory default settings.

Note:

during factory reset your custom settings are deleted.

8. Try updating your firmware.

Note:

during a firmware update your custom settings are deleted.

Returning a product for repair

You can request to return your product to tvONE™ for repair. When you contact tvONE support, have the
following information ready.

n

Product type

n

Serial number of the faulty unit (this is on the underside of the unit)

n

Full details of the issue

n

Invoice number (if available)

Contact tvONE support for your area.

n

Customers in North, Central, and South America (NCSA), email

[email protected]

n

Customers in Europe, the Middle East, and Africa (EMEA), email

[email protected]

n

Customers in Asia, email

[email protected]

EMEA and Asia

Customers in EMEA and Asia receive an RMA Request form from tvONE support. Complete the form and return it
to tvONE support for your area.

All customers

tvONE support decides if your product needs to return for repair, and, if needed, provide a return authorization
number.

Send your product to tvONE by insured carrier or registered mail. Write your return authorization number on the
outside of the packaging, and on any documents you send with your product.

You must arrange and pay for shipping and insurance. Products in transit are your responsibility. tvONE does not
accept responsibility for products lost in transit.

Do not return a product for warranty repair without a return authorization number. tvONE will not repair your product.

PDF-MWP-DYN-V1.20 tvONE

102

«
...
105
106
107
108
109
...
»

Содержание CORIOview
















































































































Отзывы:

Нет отзывов

Похожие инструкции для CORIOview

Бренд: Salus Страницы: 16

Бренд: Idis Страницы: 86

Бренд: Paradyne Страницы: 2

Бренд: AMD Страницы: 20

inLab Speedcure 9494800

Бренд: Dentsply Sirona Страницы: 91

Бренд: Hama Страницы: 8

APS6-400 Series

Бренд: Eaton Страницы: 114

Бренд: Paradyne Страницы: 10

Бренд: NC-link Страницы: 20

Бренд: ZKTeco Страницы: 68

Бренд: Avenview Страницы: 28

Бренд: Laser Страницы: 4

Бренд: RR-Concepts Страницы: 12

Бренд: Omron Страницы: 14

Бренд: McIntosh Страницы: 44

Бренд: Kontron Страницы: 32

Бренд: Cypress Semiconductor Страницы: 18

Бренд: Comelit Страницы: 140

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды