Turnigy 9XR, Руководство пользователя

Страница: 23 / 37

Expo/Dr (4/11)
This screen allows you to enter and edit Expo and D/R values for the main controls
(RUD/ELE/THR/AIL).
For each control you can input values for Left/Right for both Expo and D/R. To edit expo values
highlight the value in the “expo” column and press [MENU]. Once the cursor blinks you can use the
[UP]/[DOWN]/[LEFT]/[RIGHT] buttons to change the value.
Notice that while there is a telltale that shows you which side of travel you are adjusting:
• " -”: This means both left and right values are equal. Pressing [UP]/[DOWN]/[LEFT]/[RIGHT] will
change
both
values simultaneously.
• "←”, “→” : When moving the stick you can see either of these symbols. When this symbol is
visible you are only changing that side of travel.
For each control you can set 2 switches. The main switch changes between high rate/high expo and
mid rate. If the main switch is “low” (e.i. mid rate) the second switch can switch between mid and
low rate.
At the end of each line there's a telltale that shows you which rate you are on:
• H: High.
• M: Medium.
• L: Low.
Pressing [MENU LONG] while the cursor is on a control will take you to the Edit Expo/Dr screen. In
this screen you can adjust the values for that single control.
You will also see a graph indicating the action of that control. Press [EXIT] to return to the main
Expo/Dr screen.
Triple Dr Example
The "F.Mode" switch can be used as a triple rate switch for any one axis, or it can be used as a
triple rate flight mode switch, controlling rates and expos for some or all of the flight axes at once.
To use it as a triple rate/flight mode switch, set sw1 to "!ID2" and sw2 to "!ID1" If you want rudder,
elevator, and aileron all assigned to this switch for flight modes, be sure to set sw1 and sw2 as
above for each
EXPO/DR 4/11
exp % sw1 sw2
RUD 0 100 - --- --- H
THR 50 100 - --- --- H
ELE 0 100 - --- --- H
AIL 0 100 - --- --- H