Turnigy 9XR, Руководство пользователя

Страница: 19 / 37

Model Setup (2/10)
Lots of options here:
1. Name: Unsurprisingly here you edit the model's name. To edit: scroll down until the name is
highlighted and press [MENU].
Once your press [MENU] only one letter will remain highlighted. To change the letter you
press [UP]/[DOWN]. To move the cursor press [RIGHT]/[LEFT]. Once done, press
[MENU]/[EXIT] to exit the edit.
2. Timer: Here you set the value for the timer.
Press [RIGHT]/[LEFT] to choose between minutes and seconds.
Press [MENU] and the cursor will blink. To edit use the [UP]/[DOWN]/[RIGHT]/[LEFT] buttons
and [MENU]/[EXIT] when done.
3. Trigger: Choose w hat triggers the timer → (remember – by pressing [LEFT] you'll see the same
values with the “!” sign. This means that the usage is inverted)
1. OFF – timer is off.
2. ABS – timer is on.
4. RUs/RU%/ELs/EL%/THs/TH%/ALs/AL% - chooses to activate the timer based on stick position.
When a XXs is selected (THs for example) The timer starts whenever the stick is not at
zero.
The XX% sign is the same except the timer speed is determined by stick position.
When at zero, the timer is stopped. When at full the timer goes at normal speed.
When midway the timer's speed reflects the sticks position.
5. Switches – You can specify a switch so whenever that switch is activated the timer counts.
6. Momentary switches. A switch denoted with “m” (like TRNm) means “ momentary”. That
means that moving the switch once to the on position and back turns the timer on.
Moving it on and off again turns the timer off. (difficult I know, take a sip from your
coffee, relax a bit, take a break – it's not difficult once you try it out :) )
7. TriggerB: You can choose a second source to trigger the timer, but switches only.
8. Timer: Here you can choose whether the timer counts up or down.
SETUP 01 2/11
Name GOOFI
Timer 15:00
Trigger Ths
TriggerB ---
Timer
Count Down
T-Trim ON