Turnigy 9XR, Руководство пользователя

Страница: 13 / 37

it's a nice feature. The reverse will also reverse the throttle warning on startup and some other
throttle related functions.
8. Minute beep: Beeps every full minute while the timer is running.
9. Countdown beep: Beeps at 30, 20, 10, 3, 2 and 1 seconds before the timer ends.
10. Flash on beep: Flashes the backlight on timer beeps.
11. Light switch: This chooses a switch which can be used to turn on the backlight.
12. Light off after: When this is not OFF any keypress will turn on the backlight and turn it off after
the specified number of seconds.
13. Splash screen: Show the logo on radio startup.
Btw, you might not know this but the splash screen can be skipped on startup by pressing any
key.
14. Throttle warning: If ON will show a warning when throttle is not at idle when the Tx is turned
on.
The Tx will not output a signal until the alert is cleared.
15. Switch warning: If ON will show a warning when the switches are not at the default position
when the Tx is turned on.
The Tx will not output a signal until the alert is cleared.
16. Memory warning: If ON will show a warning when the available eeprom memory is less than
200 bytes when the Tx is turned on.
The Tx will not output a signal until the alert is cleared.
17. Alarm warning: This will give you a “heads up” if your beeper is silent.
If on and the beeper is set to '0' (Quiet) you will receive a warning on startup. This has been
added after a programing session left a user flying on silent. I find it really useful!
18. Mode: Choose between stick modes: MODE1, MODE2, MODE3 and MODE4.