Turnigy 9XR, Руководство пользователя

Страница: 7 / 37

Editing and Saving
As a rule once a value is changed it is saved. You can turn off your Tx and turn it back on and the
values will be saved. The values are saved internally in the MCU's eeprom. However there is a
slight delay sometimes so it's probably a good idea to wait a couple of seconds before turning off.
There is no undo functionality. Once something is erased/changed it's changed for good.
Generally, when a value is highlighted and you cannot move left or right then pressing
[UP]/[DOWN] will change that value.
When moving left or right is possible you need to press [MENU] to edit that value. Edit-mode is
displayed by the cursor blinking.
To exit edit-mode press either [MENU] or [EXIT].
Also, it is possible to change values with the P3 pot (the one at the front of the Tx called PIT.
TRIM/AUX 2).
On Startup- Quick Model Select
On startup holding a certain key will load an associated model memory. This is useful for quickly
changing between model memories:
• Holding [ MENU ]
Will load Model memory
#1
• Holding [
EXIT
]
Will load Model memory #2
• Holding [ DOWN ]
Will load Model memory
#3
• Holding [ UP ]
Will load Model memory
#4
• Holding [
RIGHT
]
Will load Model memory #5
• Holding [ LEFT ]
Will load Model memory
#6