LEADING JET TURBINE Co., Ltd. ATJ TURBINES
28
List of ECU STATUS message codes
Here is a list of possible messages shown on the data terminal screen and
their meaning.
Trim Low
: Indicates that the signal received from the transmitter
corresponds to the lowered trim, that is to say, engine OFF.
Ready
: Indicates that the engine is ready for starting, and that the transmitter
signal corresponds to IDLE, (green LED lit)
Stick Lo!:
This indicates that the throttle stick is in a position above IDLE, the
engine will not start with the stick in this position.
Burner on :
Verification of fuel ignition burner.
Start On:
Test of the starter
Ignition:
Gas ignition phase.
Preheat:
Phase of heating of the combustion chamber after detecting
the gas or fuel ignition.
Fuel Ramp:
Phase of acceleration until speed of IDLE.
Running:
Engine working correctly, pilot have full control of engine power.
Stop:
Engine off.
Cooling:
Starter operating to cool the engine.
Glow Bad:
Defective or disconnected glow plug or fuel burner.
Start Bad:
Defective starter, insufficient RPM reached during start, RPM sensor
failure.
Low RPM:
Engine speed below the minimum.
High Temp:
Excessive temperature
Flame Out:
Exhaust GAS Temperature below the minimum.
